Scaletrains HO Museum Quality HO Scale EMD SDL39, Milwaukee Road/Billboard Lettering / 583 / DCC & Sound Equipped
Part Number: SXT70061
Manufacturer: Scaletrains
Scale: HO Scale
$364.99
: $455.99
Quantity Available: 7
Additional Information:
- Milwaukee 583
- Era: late 1970s-1985
- Series Milw 581 to 585, built March/April 1969
- Data label and placement variations
- 81” low short hood with blanked cab heater louvers
- “Whip” radio antenna mounted on cab roof
- Snow shield brackets on rear of cab roof
- Front EMD-style low pilot snowplow with uncoupling lever clearance corners, MU hose doors, and grab irons; rear weed cutter plow
- 35-Line” cab with standard front windshields and blanked cab heater louvers
- Standard jacking pads at bolsters and extra jacking pads next to steps; total four (4) jacking pads per side
- 1,200-gallon fuel tank with single fuel filler, dual vertical fuel gauges, and round fuel gauge on both tank sides
- Fully assembled
- Multiple road numbers
- Directional LED headlights
- Operating LED-lit Prime PM-8901 Stratolite Beacon*
- Operating LED-lit tricolor (red, green, and white) flush-mounted class lights with raised gasket**
- Operating LED-lit cab interior and control stand lights*
- Operating LED-lit front, rear, and fireman’s side walkway lights*
- Operating LED-lit ground lights on both sides of locomotive
- Printed and LED-lighted number boards
- Front and rear early small deck extension
- No drop steps
- Stepwells with see-through steps; front edges painted white
- Scale sectioned “late” pattern walkway treadplate
- Front and rear Multiple Unit (MU) stands
- Latched battery box doors with narrow louvers
- Latched cab sub-base doors with early hinges
- Drop grabs and standard nut-bolt-washer (NBW) mounting on nose front and top
- Standard EMD high headlight in numberboard housing
- Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand
- Sliding cab windows
- All weather window on right cab side; short mirror mounted in front of window on left cab side
- No sunshades
- Standard EMD arm rests
- Lost-wax brass Leslie S-3L-R three-chime horn; mounted center rear of number board housing
- Ratchet brake with chain
- Small ECAFB
- Early (smooth) blower duct housing
- Inertial air intake grilles without drip rails
- Standard corrugated air filter screens
- Separately applied dust bin and exhaust stack
- Non-dynamic brake
- “Chickenwire” radiator grilles
- Standard-height fan housings with 9-blade radiator fans visible inside
- Photoetched concentric ring fan grilles
- Winterization hatch over first radiator fan housing
- Front and rear straight uncoupling levers with loop handles; two inner and two outer mounting brackets
- Handrail set with pilot face mounted outer end rail stanchions and solid railing
- 4-hose MU hose clusters with silver gladhands
- Late deck-mounted MU receptacle
- Pilot face bracing detail behind stepwells
- Underbody frame rail with separate plumbing and traction motor cables
- Sill-mounted EFCO button
- Steel bell mounted high behind the cab on the left side
- Air tanks with plumbing
- Salem air filter (accordion style)
- Detailed light weight EMD C-C export trucks with Hyatt bearing caps and separate brake cylinders and brake lines
- Inboard and outboard sanding lines
- Speed recorder mounted on the second axle, left side
- Paint colors matched to Tru-Color Paint: TCP-111 Milwaukee Road Orange
- Factory-applied wire grab irons, wire lift rings, windshield wipers, horns, coupler cut levers, trainline hoses with silver gladhands, sand hatch covers, and much more
- Semi-scale coupler buffer equipped with durable metal semi-scale Type “E” knuckle couplers
- All-wheel drive
- All-wheel electrical pick-up
- Motor with 5-pole skew-wound armature
- Dual flywheels
- Printing and lettering legible even under magnification
- Operates on Code 70, 83 and 100 rail
- Packaging safely stores model
- Minimum radius: 18”
- DCC & sound equipped locomotives also feature:
- ESU LokSound 5 DCC & Sound decoder with “Full Throttle” feature
- Dual cube-type speakers
- EMD 12-Cylinder 645E3 turbocharged prime mover sounds
- Curve squeal and frog clank sounds*
- ESU designed “PowerPack” with two super capacitors***
- Operates on both DC and DCC layouts