Traxxas 77036-4 X-Monster: Brushless Electric Monster Truck Chassis with TQi™ Traxxas Link™ Enabled 2.4 GHz Radio System & Traxxas Stability Management (TSM)®

Features Overview

Clipless Monster Truck Bodies (sold separately)

• Quick one-hand installation and removal
• Pivoting rear latch mechanism
• Eliminates body posts and clips
• Reinforced for extra protection

VXL-8s™ Waterproof Electronic Speed Control

• 8S LiPo compatible
• Built-in cooling fan
• Machined heat sinks
• 10-gauge silicone wire
• Integrated protection circuits
• LED status lights

Velineon® 1200XL Brushless Motor

• 4-pole 1275 Kv
• 5 mm output shaft
• Aluminum slip-on heat sink
• Dual motor cooling fans

Performance

• 50+ mph with two 4S LiPo batteries and included optional pinion gear

Traxxas Stability Management® (TSM)

• Helps prevent spinouts and loss of control
• Adjustable assistance from off to 100% via the transmitter

TQi™ 2.4 GHz High Output Radio System

• Traxxas Link™ enabled
• 2.4 GHz 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
• Automatically stores and loads settings for up to 30 Traxxas Link-enabled models
• Multi-function knob
• Adjustable steering and throttle percentage (dual rates)
• Adjustable steering and throttle sensitivity
• BEC voltage and motor temperature sensor installed

Driveline

• 8S Driveline with heavy-duty components:
  • Steel pinion and spur gear
  • Full-time shaft-driven 4-wheel drive
  • Heavy-duty steel CV driveshafts
  • Beefed-up steel differential output cups
  • Splined aluminum center driveshaft
  • Machined aluminum stub axles
  • Torque-Biasing Center Drive™ absorbs shocks and distributes power to all four wheels
  • 24 mm splined wheel hexes
  • Sealed, silicone fluid-filled diffs with large module ring and pinion gears

Chassis

Heavy-Duty Modular Composite Chassis

• Interlocking front and rear bulkheads
• Motor mounts to rear bulkhead to eliminate gear crunching flex
• Easy to service and access components
• Driveline sealed in the chassis to keep out dirt and grit

Snap-Lock Battery Retention System

• No body clips or hook-and-loop straps
• Battery hold-downs pivot for easy access
• Adjustable for battery size
• More secure than conventional retention systems
• Integrated into chassis top brace for improved battery tray and chassis stiffness

Bumpers & Skid Plates

• Front energy-absorbing rubber impact cushion
• Lower front and rear skids for impact and abrasion resistance
• Integrated nerf bars for side impact resistance

Steering

• 2085XL high-output metal-gear steering servo:
  • 450 oz-in torque
  • Aluminum cooling fins
• Fully-supported case mounting
• Double-shear, bearing-supported servo horn

Suspension

• Heavy-duty suspension arms with double-shear connections
• High-strength steel suspension pins used throughout
• Captured outer lower suspension pins with locknuts
• C-hub and steering block geometry maximize steering angle
• Adjustable roll center
• Steel upper and lower tie bars
• Full-contact sealed bearings used in exposed locations

Shocks

Aluminum GTX™ Shocks

• Machined aluminum threaded body
• Extra-large bore and capacity
• 5.2 mm damper shaft
• Lower seal cartridge includes integrated wiper seal combination
• Adjustable upper spring retainer
• Plastic shock caps with pivot balls
• Fixed shock locations
• Lower spring perches bolted on

Wheels & Tires

• Dual-profile white monster truck wheels:
  • Replica military-style axle hubs
• Huge 8.6" belted Terra Groove monster truck tires:
  • Super-soft rubber compound for exceptional grip
  • Internal belting virtually eliminates ballooning